Furuno PFX-50 installation instructions Connection

2. Connection

Connect a modular plug to the "LINE" jack on the rear side of the PFX-50. See the figure below. Another modular plug should be connected to either the Junction Box via a modular jack box or the Communication Unit directly, depending on number of facsimile. For further details, refer to the Installation Manual of the FELCOM.

3. Changing dialing format

Change dialing format from "pulse (dial)" to "pushbutton".

Dialing Format

Only for telephone

Earth

Terminal

Pulse/Tone	Incoming Volume	Ringing Tone
Select Switch	Switch	Select Switch
Set it to "T".	Set the volume of	Set the ringing tone
("T" means	incoming calls to	to OFF, LOW or HIGH.
pushbutton.)	HIGH or LOW.

Line	Not used
Connector

2