MID CFQ | Select the Midrange centre frequency: 0.5K / |
| 1.0K / 1.5K / 2.5KHz |
TRE | Adjust the Treble level between |
TRE CFQ | Select the Treble centre frequency: 10.0K / |
| 12.5K / 15.0K / 17.5KHz |
BAL (Balance) | Adjust the balance between the right and left |
| speakers from 12R (full right) to 12L (full left). |
FAD (Fader) | Adjust the fader between the front and rear |
| speakers from 12R (full rear) to 12L (full front). |
(SUBWOOFER) |
|
SW ON/OFF | Turn On or Off the Subwoofer RCA output. |
SW LPF | Subwoofer low pass crossover: 80/120/160Hz |
SWAM ON/OFF | In AM mode, turn ON or OFF the Sub output. |
NOTE
If the Subwoofer RCA output is set to “OFF”, then the SW LPF & SWAM functions will not be displayed.
EQUALISER OPERATION
Whenyouactivatethe
Press the Equaliser button repeatedly to cycle through the following
To return to the Bass/Midrange/Treble settings that were in use before the EQ was selected, please select the USER setting.
SYSTEM MENU
Press 
(MENU) to access the System Menu and press again to select the item be adjusted, then rotate Encoder Volume Knob to select a value / option. To exit this menu at any time, press the ESC/RGB button
STORE (Auto store)
While in Tuner mode, press the ENCODER VOLUME CONTROL to activate Auto Store. The six strongest stations of the selected band will be saved in the preset channels automatically
RDS ON/OFF
While in Tuner mode, this selection turns On or Off RDS. RDS Functions are explained in more detail on Page 11. If RDS is set to OFF, then the RDS Functions indicated below with an * will not appear in the System Menu
PTY* (Program Type)
Press the ENCODER VOLUME CONTROL to enter program type, then rotate the ENCODER VOLUME CONTROL to select the category.
AF* ON/OFF
Turn On or Off the Alternate Frequencies function.
TA* ON/OFF
Turn On or Off the Traffic Announcement function.
REG* ON/OFF
Turn On or Off the Set Region for Alternate Frequencies function
CT* ON/OFF
Turn On or Off the CT function.
9
