Fusionbrands CA-CD700 instruction manual Radio Operation

Models: CA-CD700

1 28
Download 28 pages 6.81 Kb
Page 10
Image 10

LOC* ON/OFF

(Local/Distance). Use this setting to Auto Seek to strong local stations (Local) or all stations regardless of their strength (Distance).

AREA

Select your country/region for the tuner: OCEANIA (Australia/New Zealand); USA; EUROPE;

RUSSIA & press ESC/RGB

to save.

CLK (Clock)

To set the clock, rotate the Encoder Volume Control to set the hours (Note “A” or “P” will be displayed in the top-right hand of the LCD display indicating AM or PM if the Clock is in 12H mode – see below). Press the Encloder Volume control to select “minutes” then rotate the control to set.

CLK 12H/24H (Clock Format)

Select the time format 12H or 24H

BEEP ON/OFF

Select On or Off to activate button confirmation beep tones.

DEMO ON/OFF

Demo mode is activated when the unit is first connected to the vehicle, but is de-avtivated when the Power Button is pressed. It can, however, be activated again by pressing the Power Button. To stop this feature, set Demo Mode to off.

COL0UR

This unit is equipped with a 32K+ RGB variable colour display. By rotating the Encoder Volume Control, you can select the system colour from the following options:

COLOUR SCAN (default setting); WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE 2; BLUE 1; BLUE 2; USER; ORANGE

USER (USER SELECTED COLOUR):

This allows you to select your choice of display colour from over 32,000 combinations (32K+). When you select USER in the colour menu, press the Encoder Volume Control to then rotate to select the intensity or Red, Green & Blue (from between 0 and 32) to make your own custom colour.

To switch between R (Red), G (Green) and B (Blue) setting modes, push the TUNE UP button

Press ESC/RGB button once you have completed your selection.

RADIO OPERATION

TUNE INTO A RADIO STATION

1.Press the SOURCE button repeatedly until [RADIO] is displayed on the LCD screen.

2.Select your preferred listening Band (FM or AM) by pressing

BAND . There are 3 FM Bands [FM1] [FM2] [FM3] and 2 AM Bands [AM1] [AM2]. These multiple Bands allow you to store up to 18 FM stations & 12 AM stations in memory (see below).

3.To search for a radio station, press either the TUNE UP or

DOWN buttons to search for the next station higher than the current station frequency or lower than the current frequency.

4.To Manually tune to a radio station, press and hold either the

TUNE UP or DOWN button until the tuner frequency on the LCD display starts flashing. You can then release the TUNE

10

Page 10
Image 10
Fusionbrands CA-CD700 instruction manual Radio Operation