Switching off
Switching off
Fully turn both control knobs to the OFF position.
Residual heat display
After switching both control knobs to the OFF position, the luminous discs behind the control knobs will flash, as long as the grill has not cooled down sufficiently to be touched safely.
Caution! The appliance must not be touched until the residual heat display has gone off! Risk of burns!
Do not close the cover until the appliance has cooled down completely!
Holiday safeguard (Automatic
Luminous disc behind control knob | Signification | Cause / Remedy |
lights OFF | grill OFF |
|
lights constantly | grill ON | normal use |
slow flashing | grill ON, heating up | normal use |
slow flashing | residual heat | The appliance is too hot to be touched |
| display | safely. |
fast flashing | holiday safeguard | The appliance setting has not been |
|
| changed for over 4 hours. Turn right |
|
| control knob to 0 and then switch |
|
| on again if required. |
fast flashing | power cut | After a power cut, the appliance stays |
|
| switched off for safety reasons. |
|
| Turn control knob to 0 and then switch |
|
| on again if required. |
|
|
|
|
|
|
|
|
|
8