Gamber Johnson 7160-0264-04, 7160-0073 25-20 x .75 Carriage Bolt, Flat Washers Nuts, Cable Ties

Cable Ties Cable Ties

Cables are attached to ports on the back of the dock. Cable ties and cable tie holders are provided to secure the cables to the dock. Press the cable tie holder into the mounting holes on the dock. Insert the cable tie through the tie holder and tighten the cable tie around the cables as needed.

DOCKING INDICATOR LED

With computer installed in the dock, the Docking Indicator LED, located on the right side of the dock, can be used as a troubleshooting tool.

GREEN: All ports are ready to use.

ORANGE: USB port and LAN port do not function, external power is not connected.

RED: PC is not supported or connection is not made.

RED (BLINKING): Error has occured in the firmware. Stop using at once and contact Panasonic Technical Support.

NOT LIT: PC not installed or PC is OFF, Standby or Hibernation.

Vehicle Mounted Docks

CF19 vehicle docks and cradle are designed to be used with Gamber-Johnsons' motion attachments, poles and vehicle bases.

See below for mounting dock to DS, MCS or 0-90 Clevis with (4) .25-20 x .75 long carriage bolts.

.25-20 x .75 Carriage Bolt

0-90 CLEVIS

DS or MCS CLEVIS

.25 Flat Washers

.25-20 Nuts

.25 Flat Washers

.25-20 Nuts

5 0F 7