3Com 155 PCI manual Removing an LEC from NetWare, Installation Options screen shown in -1 appears

4-26 CHAPTER 4: NETWARE SERVER DRIVER INSTALLATION

Removing an LEC from NetWare

To remove an LEC from the AUTOEXEC.NCF file, follow these steps:

1From the system prompt, enter the command:

load install

The Installation Options screen shown in Figure 4-1 appears.

2Select NCF files options.

This opens the AUTOEXEC.NCF file for editing.

3Delete the load and bind commands of the ELAN that you want to remove.

The 3C975.LAN driver name can appear in either the load or bind commands as follows:

load 3c975.lan cardnum=1

frame=ethernet_802.2 linktype=1 channel=1 name=atm_1 elan=elan3372_1 vpivci=2 SIG_VERSION=1 max_frame_size=1514

;

bind ipx atm_1 net=6

4Save and exit the AUTOEXEC.NCF file.

5Exit the NetWare install utility.

The load order of the driver determines which physical NICs are bound to which drivers. Changing the sequence of load commands in the AUTOEXEC.NCF may necessitate changing the cabling of the physical NICs. See the section “NetWare Card Numbers and Multiple Physical NICs” for further information.