3Com 155 PCI manual Configuring the TCP/IP Network Interface

Configuring LECs and Resilient Server Links 4-13

To configure LECs using the NetWare install program, perform the following procedure:

1Select Select/Modify driver parameters and protocols at the bottom of the ELAN Configuration screen, as shown in Figure 4-7.

The highlight bar moves to the TCP/IP option in the Protocols box.

2To add a protocol, select the desired protocol from the Protocols box.

IPX is the default protocol. If you select TCP/IP, the dialog box shown in Figure 4-8 appears.

Figure 4-8 Configuring the TCP/IP Network Interface

3Edit the TCP/IP information as follows: a Enter the IP address.

b Enter the IP mask.

c Press [Enter] to continue.