3Com 155 PCI manual Installing the Network Driver, Click Add Adapter, Click Continue

3-8 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION

You have completed the ATMLink Windows NT network driver installation. The remaining sections of this chapter provide a more detailed approach to installing the ATMLink NIC network driver with Windows NT.

Installing the Network Driver

The following driver installation procedure is standard to Windows NT 3.51. The driver can also be installed as part of the Custom setup procedure supplied with your Windows NT operating system. Refer to the Microsoft Windows NT System Guide for additional information.

NIC Detection, Resilient Server Links, and ELAN Allocation

It is assumed that at least one 3C975 ATMLink NIC is installed in the system PCI bus.

1Boot your system under Windows NT.

2Log into your Windows NT Administrator account.

3Double-click the Control Panel icon.

4Double-click the Network icon.

The Network Settings window shown in Figure 3-1 appears.

5Click Add Adapter.

The Add Network Adapter window appears, as shown in Figure 3-2.

6Select <Other>Requires disk from manufacturer from the bottom of the Network Adapter Card list box.

7Click Continue.

The Insert Disk dialog box appears, as shown in Figure 3-3.