3Com 155 PCI manual Configuring LECs and Resilient Server Links

Configuring LECs and Resilient Server Links 4-11

Configuring LECs and Resilient Server Links

After the driver files are copied to the server, the

ELAN Configuration screen appears, as shown in Figure 4-7.

Figure 4-7 ELAN Configuration Screen

Table 4-1 lists the configuration parameters of the 3Com ATMLink NIC, the range of values, and parameter descriptions. Default values are shown in bold.

Table 4-1 3C975 ATMLink NIC NetWare Install Utility Configuration Parameters

	Range of Values
Parameter	(Defaults in Bold)	Description
Card Number	1, 2, 3, 4	This number denotes which physical NIC
		is being configured.
Channel	1–64	Use a unique channel number for each
		ELAN and standby NIC in the system
		(16 ELANs per NIC, 4 NICs per system).
ELAN Name	1- to 32-character ASCII	ELAN names should match ELAN names
	string	configured on the ATM switch.
Link Type	Ethernet	All ELANs with the same card number
	Token ring	must have the same link type. A standby
		NIC must have the same link type as its
		active NICs.
Home Card	<blank>, 1, 2, 3, 4	If Card Number=3 and Home=2,1 then
		Card 3 is a standby NIC for Card 2 and
		Card 1.
(continued)