3Com 155 PCI manual Selecting the Card Number

4-14 CHAPTER 4: NETWARE SERVER DRIVER INSTALLATION

4Press [F3] to set the frame type.

Use the arrow keys to select a new frame type, if necessary.

The default frame type is 802.2. If you are configuring a token ring LEC, change the frame type to Token Ring or Token Ring SNAP as appropriate.

5Edit the Card Number parameter.

a Use the arrow keys to select the Card Number parameter and press [Enter].

The dialog box shown in Figure 4-9 appears and lets you select the card number.

bSelect the card number you want and press [Enter].

When multiple ATMLink NICs are installed, you must determine which physical NIC corresponds to which card number in order to correctly connect the cables to the ATM switch. See the next section, “NetWare Card Numbers and Multiple Physical NICs.”

.

Figure 4-9 Selecting the Card Number