3Com 155 PCI manual Viewing Test Results, Click Start to run the External Loopback Test

Viewing Test Results 6-9

9Click Start to run the External Loopback Test.

The test runs ten times by default. If you want to change the number of test repetitions, click Test Setup.

10If the test fails, go to the section “What to Do If a Test Fails” later in this chapter.

11Remove the loopback plug and insert the network cable.

Viewing Test Results

The Test Results screen shown in Figure 6-6 appears after the tests have been run, showing the number of times each test was run and the pass/fail results.

Figure 6-6 Test Results Screen