3Com 155 PCI manual Installing the Network Driver

Installing the Network Driver 3-11

11Click Yes if you want the 3Com driver installed on the indicated NIC. Otherwise, click No.

If you click Yes, the NIC Mode dialog box appears, as shown in Figure 3-6. If you click No, the NIC Installation dialog box reappears for the next discovered ATMLink NIC.

To correlate the PCI bus and slot number with a physical NIC, run the 3Com ATMLink diagnostic utility.

Figure 3-6 NIC Mode Dialog Box

12Click Active to make the identified NIC an active NIC, or click Stand-byto make it a standby NIC (resilient server link).

■If you select Stand-by, the NIC Installation dialog box reappears for the next discovered 3C975 ATMLink NIC.

■If you select Active, the Total Number of ELANs dialog box appears, as shown in Figure 3-7.

Figure 3-7 Total Number of ELANs Dialog Box

13Enter the number of ELANs you require on the indicated NIC, and click OK.

The maximum number of ELANs per NIC is 16.