3Com 155 PCI To configure NICs and ELANs, follow these steps, ELAN Parameters specific to each ELAN

3-14 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION

Table 3-1 3C975 ATMLink NIC Installation Configuration Parameters (continued)

	Range of Values
Field	(Defaults in Bold)	Description
ELAN Parameters (specific to each ELAN)
ELAN Name	0- to 32-character	ELAN names must match ELAN names
	ASCII string	configured on the ATM switch. ELAN
		names are case-sensitive.
Traffic Shaping	1–155 Mbps	Sets the maximum bandwidth available
		to an ELAN.
LE Configuration	Automatic using	Select Automatic using ILMI for ILMI
Mode	ILMI	service.
	Automatic with	Select Automatic with specific LECS to
	specific LECS	connect with a LECS different from that
		specified by ILMI.
	Manual with specific	Select Manual with a specific LES to
	LES	bypass the LECS and connect directly
		with a LES of known address.
LECS ATM Address	ATM Forum	Enter the 20-byte network address of
	Well-known Address	the target LECS if it does not use the
		ATM Forum Well-known Address.
LES ATM Address	No default	Enter the 20-byte network address of
		the target LES.

To configure NICs and ELANs, follow these steps:

1Select the NIC that you want to configure from the ATMLink NIC list box in the ATMLink Installation window.

You can configure the NICs in any order that you wish.

2To make the selected NIC a standby NIC, select one or more active NICs.

Eligible active NICs appear in the Resilient Server Link box. If you make a NIC a standby NIC, no further configuration is necessary. Proceed to step 7.