3Com 155 PCI manual Write down the MAC address of the NIC and note which slot you used

Installing the 3C975 ATMLink NIC 2-3

8Insert the 3C975 ATMLink NIC in the selected slot, as shown in Figure 2-2.

Figure 2-2 3C975-F ATMLink NIC Installed in the Chassis

9Write down the MAC address of the NIC and note which slot you used.

This information is helpful when installing the network drivers and connecting the cables to the ATM switch.

The MAC address is the 12-digit hexadecimal number printed on the small bar code label on the component side of the NIC.

10Press down gently and firmly on the NIC to seat it properly.

11Use the screw removed in step 7 to secure the 3C975 ATMLink NIC bracket to the system chassis.

12Replace the system cover.