3Com 155 PCI manual Adding Snmp Support, 3Com ATMLink Snmp LEC MIB Agent, as shown in Figure

3-24 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION

Adding SNMP Support

The SNMP agent shipped with the ATMLink NIC offers limited support for the ATM Forum LAN Emulation Client Management Version 1.0 Specification. The agent is shipped on the ATMDisk diskette as the LECMIB.DLL and LECIFMIB.DLL files, for use with Windows NT only. The files are automatically copied to the system hard drive during driver installation and install themselves if Windows NT is running the SNMP service. If the SNMP service was not running when the agent was copied from the ATMDisk diskette, the agent must be manually installed.

The ATMLink SNMP agent responds to requests from any standard SNMP network management software. The SNMP Get and GetNext commands work for all the LEC MIB objects. The Set command does not work with all SNMP variables, and the user cannot create or modify an LEC.

To manually install the ATMLink SNMP agent on your

Windows NT system, perform the following procedure:

Make sure that the SNMP service is installed on Windows NT. See your Microsoft WIndows NT Installation Guide for more information.

1Perform steps 1 through 9 of the Windows NT driver installation procedure described in the section “Installing the Network Driver.”

2From the Select OEM Option dialog box, select

3Com ATMLink SNMP LEC MIB Agent, as shown in Figure 3-16.