3Com 155 PCI manual Changing the Test Setup, Enabling and Disabling Individual Tests

Changing the Test Setup 6-11

Figure 6-8 Test Information Screen

Changing the Test Setup

In rare cases, such as intermittent faults, you may wish to change the default values of the diagnostic utility. Otherwise, no changes to defaults are necessary in order to detect the most common error conditions.

Enabling and Disabling Individual Tests

To enable and disable individual tests, follow these steps:

1From the diagnostic utility main screen, select Test Setup from the Test menu.

2Use the mouse or [Tab] and arrow keys to select any of the fields within the Test Setup box.

3Press the [Space Bar] to enable or disable the selected test.

4When you are satisfied with the new test setup, click OK.

5To run the tests, choose Run Tests from the Test menu and click Start.