3Com 155 PCI manual Select an ELAN name and then click Configure ELAN

3-16 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION

5Select an ELAN name and then click Configure ELAN.

The ELAN Configuration window appears, as shown in Figure 3-9.

Figure 3-9 ELAN Configuration Window

aEnter the ELAN name.

The ELAN names should match the ELAN names configured on the ATM switch, LECS, or LES. In many ATM installations the ELAN name is supplied by the LES.

bSelect the LE configuration mode.

■Select Automatic using ILMI to use the ATM switch-based Interim Local Management Interface service (ILMI) to connect to the LES.

■Select Automatic with specific LECS if you wish to contact an LECS not identified by ILMI. Enter the 20-byte ATM address of the specific LECS if it does not use the default ATM Forum Well-known Address. To reinstate the default value, click the Well-known LECS Address button.

■Select Manual with specific LES to connect directly to the LES. Enter the 20-byte ATM address of the LES.