Gamber Johnson 7160-0264-00, 7160-0264-03 LED Assembly Activation Button #6-32 x .38 Screws

7160-0215: LED Assembly

Position the LED assembly over two holes in the back cover, and attach using the #6-32unc x .38 screws that were provided with the LED assembly.

The LED is powered using the red and black wires on the back of the light base. The LED Assembly is designed to operate on 12volts DC.

In a negative ground vehicle:

Connect the RED wire to the positive pole of the vehicle battery or power distribution box. It is recommended that a user-supplied fuse holder and 1 amp fuse be installed on red the wire. Connect the Black wire to a suitable chassis GROUND or the NEGATIVE pole of the battery.

Turn on the LED by pressing the Activation Button on the head of the LED Assembly.

LED Assembly

Activation Button

#6-32 x .38 Screws

The LED has three light options: White, Red and White/Red. Press the Activation Button to toggle through the options.

Hold the Activation Button down for approximately one second to turn the LED off.

7 0F 7