Acer 8935G manual General Information, Pre-disassembly Instructions, Disassembly Process

General Information

Pre-disassembly Instructions

Before proceeding with the disassembly procedure, make sure that you do the following:

1.Turn off the power to the system and all peripherals.

2.Unplug the AC adapter and all power and signal cables from the system.

3.Place the system on a flat, stable surface.

4.Remove the battery pack.

Disassembly Process

The disassembly process is divided into the following stages:

•External module disassembly

•Main unit disassembly

•LCD module disassembly

The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence. Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Main Screw List

Screw	Quantity	Part Number
SCREW M3*0.5+3.5I		86.A03V7.006
SCREW M2.0*6-I(ANTI-LOOSE)		86.N1407.001
SCREW M2.5*2-I (NI,NYLOK)		86.TDY07.001
SCREW M2.5*4-I(BNI)		86.N1407.003
SCREW M2.0*3.0-I IRON		86.S0207.001
SCREW M2.5*4.0-I(NI)(NYLOK)		86.D01V7.001
SCREW M2.5*6.5-I(BZN(NYLOK-RED)		86.ARE07.001
SCREW M2.5*5.0-I(NI)		86.ARE07.004
SCREW M3*0.5+3.5I		86.TDY07.003

54 Chapter 3