LCD Module Reassembly Procedure

The SM80 ships with either a Standard Bezel or Flush Bezel with glass panel LCD Module. The following sections detail the two distinct procedures, beginning with the Standard Bezel detailed below.

Standard Bezel LCD Module Reassembly—LCD Panel

1.Connect the LCD cable to the panel connector as shown.

2.Press down the adhesive strip to secure the cable in place.

3.Run the cable along the back of the panel and press down as indicated to secure the cable in place.

IMPORTANT: Ensure that the LCD cable runs between the green callouts to avoid trapping when the panel is replaced in the LCD Module.

134

Chapter 3

Page 144
Image 144
Acer 8935G manual LCD Module Reassembly Procedure, Standard Bezel LCD Module Reassembly-LCD Panel