INSTALLATION
GAS APPLIANCE FINAL ASSEMBLY
After the appliance has been properly installed and all gas connections have been made and tested, you can now install the log set. See Door Assembly on page 11 for door removal instructions.
INSTALLING LOG SET:
WARNING: If logs are not installed according to the directions in this manual, flame impingement and improper combustion could occur and result in ex- cessive production of carbon monoxide (CO), a col- orless, odorless, toxic gas.
This appliance is equipped with a
1.Carefully place the largest log in the rear of the fire- box as shown in the following illustration.
2.Install the front log as shown in the following illustra- tion.
3.Install the right top twig as shown in the following illustration.
4.Install the center top twig as shown in the following illustration.
5.Install the left top twig and embers as shown in the following illustration.
Glowing Embers
One package of ember material has been included with this gas appliance. You will not need to use the entire bag (additional ember material is provided for your fu- ture maintenance needs).
IMPORTANT: The quantity and placement of the ember material can affect stove performance there- fore it is very important that it be placed as shown in the picture on instruction # 5 and shown below.
Proper Placement of Ember Material: Unpackage and divide the fine ember material (mineral wool) into thumbnail sized fluffy pieces. Distribute the pieces over the top of the front burner ports and filling the area in front of and beneath the forward log and running the full length of the log.
PAGE 10
