Gardena 48 manual Technical Data, Service / Warranty

GB

9. Technical Data

	HighCut 48 (Art. 8880)
Power consumption, motor	550 W
Voltage / Frequency	230 V / 50 - 60 Hz
Strokes	2,800/min.
Length of cutter blade	48 cm
Tooth gap of cutter blade	27 mm
Range of extension of
telescopic tube	0 – 62 cm
Weight with blade	5.5 kg
Workplace related
sound pressure level L pA 1)	83 dB (A)
Uncertainty KpA	3 dB (A)
Noise emission value L WA 2)	measured 94 dB (A) /
	guaranteed 96 dB (A)
Hand / arm vibration a vhw 1)	< 2.5 m /s 2

Measuring process complying with 1) EN 774 2) EU-directive 2000 /14 / EC. The stated vibration emission value has been measured according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.

10. Service / Warranty

GARDENA guarantees this product for 2 years (from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults. Under warranty we will either replace the unit or repair it free of charge if the following conditions apply:

•The unit must have been handled properly and in keeping with the requirements of the operating instructions.

•Neither the purchaser nor a non-authorised third party have attempted to repair the unit.

The blade and eccentric drive are wearing parts and are not covered by the guarantee.

This manufacturer’s guarantee does not affect the user’s existing warranty claims against the dealer / seller.

If a fault occurs with your hedge trimmer, please return the faulty unit together with the receipt and a description of the fault, with postage paid to the address of the Service Centre at the back of these operating instructions.

18