
GB
3. Assembly
3.1.General Assembly Instructions for all Pressure Sprayers (Art. No. 867/ 869 / 875 / 879 / 880)
Mounting the spray tube |
| 1. | Unscrew the union nut 1 on the hand valve 2. |
in the hand valve: |
| 2. | Push the spray tube 3 all the way into the hand valve 2. |
| 2 | ||
Art. 880 | 3. | Tighten the union nut 1 on the hand valve 2 by hand | |
|
|
| (do not use pliers). |
3 | 1 |
Attaching the spray hose to the hand valve:
2 6 | 4 5 |
The sprayer tube of art. 880 is telescopic (min. / max. sprayer tube length 60 /100 mm).
1.Push the long union nut 4 over the spray hose 5.
2.Push the spray hose 5 with connection nipple 6 into the hand valve 2.
3.Tighten the long union nut 4 on the hand valve 2 by hand (do not use pliers).
3.2. Assembly Instructions for Pressure Sprayer Art. No. 869
Installing the filter and suction pipe:
8 |
1. | Shut the filter 7 and press firmly |
|
| |
| into the suction pipe 8. |
| 8 | |
2. | Guide the suction pipe 8 through | 9 | ||
| ||||
| the eyelet at the pump tube 9 |
|
| |
| and press firmly into the opening in |
|
| |
| the container cap. |
|
|
7 |
Attaching the spray hose to the container cap:
5
0 |
A |
B |
1.Push the short union nut 0 over the spray hose 5.
2.Push on the spray hose 5 so that it covers at least the beginning of the thread A.
3.Screw the short union nut 0 onto the container cap B and tighten by hand (do not use pliers).
Attaching the shoulder strap:
C | E |
|
D |
1. | 2. | F |
1.Unscrew the screw C using a screwdriver and remove the spray tube holder D.
2.Put the shoulder strap E with the elongated hole over the plastic tube F.
3.Reattach the spray tube holder D and screw in the screw C using a screwdriver.
12