![2. Operating instructions information](/images/new-backgrounds/98582/9858211x1.webp)
G
GARDENA Garden Vac with shredding and blowing facility 1. Technical data
Motor – power consumption | 1400 W (max. 1500 W) |
Mains voltage | 230 V |
Frequency | 50/60 Hz |
Vacuum power | max. 12.5 m 3 /min. |
Blow power | max. 260 km/h |
Weight | approx. 4.5 kg |
Contents of the catcher | 70 l |
Workplace related sound |
|
pressure level L pA 1) | 92 dB (A) |
Noise emission value L WA 2) | measured 100 dB (A) / guaranteed 102 dB (A) |
Hand / arm vibration a vhw 1) | < 2.5 ms - 2 |
Measuring method according to 1) EN 50144 | 2) directive 2000/14/EC |
2. Operating instructions information
Please read and follow these | For safety reasons child- |
operating instructions carefully. | Aren under the age of 16 |
Familiarise yourself with the unit’s | or people who are not familiar |
features, its proper use and the | with these operating instruc- |
safety instructions included. |
|
tions should not use this Garden Vac.
Please keep these operating instructions in a safe place.
3. Product use
The GARDENA Garden Vac is designed for vacuuming and blowing leaves and dirt as well as for vacuum cleaning together with the dust filter in private gardens.
This Garden Vac is not designed for use in public facilities, parks,
sporting grounds, on roads, in agriculture or forestry.
It is essential to observe the manufacturer’s operating instruc- tions to ensure the unit’s proper functioning. These instructions also contain advice for service, maintenance and repair.
Attention! For health Aand safety reasons the
Garden Vac must not be used in areas with
4. Assembly (ill. B)
Contents check
The carton contains the following items:
.motor part of the Garden Vac
.vacuum tube
.connection angle
.tube runner
.surface vacuum tube
.catcher
.vacuum hose
.additional handle (two handle halves)
.1 dust filter
.fixing parts (screws, nuts, caps)
.operating instructions
.counter ring
Fitting the vacuum tube Before starting work, fit the vacuum tube (1) provided onto the vacuum tube connector of the unit (1a). Now slide the two handle halves of the additional handle (2) over the junction point of the vacuum tube (1) and vacuum tube connector (1a). Take care that the angled addi- tional handle (2) faces towards the motor casing.
Secure the additional handle (2), using the three screws provided. Cover the bore holes with the caps.
Attention!
For safety reasons you should not disassemble the vacuum tube once assembled!
Fitting the tube runner
Lock the tube runner (3) provided by inserting it into the recess (4) of the vacuum tube (1). Secure it with the screw and nut provided.
12