Unit Installation

Choose a location that provides optimal viewing and allows easy access to the unit’s keypad. Select a mounting surface strong enough to support the weight of the unit and protect it from excessive vibration or shock. DO NOT mount the bracket in a location where the unit is exposed to extreme temperature conditions. When installing the mounting bracket, be sure to allow room for the connection and routing of the power cable.

Tool List (not included)—drill, screwdriver (Phillips or standard), three #8 pan-head machine bolts with matching nuts and washers, and a 5/32" drill bit, OR three #8 pan head self-tapping screws, and a 1/16" drill bit.

To mount the bracket assembly:

1.Using the swivel base as a template, mark the location of the three mounting holes.

2.If securing the base with machine bolts, drill three 5/32" holes at the locations you marked. If securing the base using self- tapping screws, drill 1/16" starter holes at the locations you marked. Generally, starter holes should be no deeper than half the screw length.

3.Secure the swivel base with three bolts or screws. DO NOT OVERTIGHTEN.

4.Attach the swivel bracket and secure it with the short knob.

INSTALLING THE FISHFINDER 160C > UNIT INSTALLATION

Mounting Holes

Swivel Base

Short Knob

Swivel Bracket and Base

Fishfinder 160C Owner’s Manual

5