Manuals / Brands / Marine Equipment / Fish Finder / Garmin / Marine Equipment / Fish Finder

Garmin 160C NMEA Output, Beeper, Contrast, Light, Defaults

1 34

Download 34 pages, 1.44 Mb

NMEA Output

Choose to turn the NMEA Output On or Off

(default). The Fishﬁnder 160C can output NMEA data for Water Depth, Water Temperature, and Water Speed. The NMEA output is NMEA 0183 version 3.01.

Beeper

Choose to turn the Beeper On or Off. When the Beeper is On, a beep is sounded when a key is pressed, a

message is shown or an alarm activated. With the Beeper Off, all Beeper functions are muted.

Contrast

Adjust to compensate for different light levels or viewing angles. Moving the slider up darkens the contrast. Moving the slider down lightens the contrast.

OPERATING INSTRUCTIONS > THE SETUP MENU

Light

Changes the level of screen backlighting. This setting affects the middle level (user level) when cycling through the Backlight setting. To cycle through the Backlight settings, press and release the POWER key.

Defaults

This option restores the factory default settings for the unit.

Fishﬁnder 160C Owner’s Manual

Contents

Page Page INTRODUCTION About This Manual Appendix TABLE OF CONTENTS Product Registration Contact Garmin Caring for the Fishﬁnder 160C Caring for the Screen Cleaning the Case Warnings Important Information Understanding Sonar Understanding the Fishﬁnder Screen Using Dual Beam Whiteline Thermoclines INSTALLING THE FISHFINDER 160C Packing List Unit Installation To mount the bracket assembly: To install the unit on the mounting bracket: Transducer Installation To assemble the transducer: Selecting a Transom Mount Location Mounting the Transducer on a Transom To mount the transducer on a transom: Mounting the Transducer on a Trolling Motor To mount the transducer on a trolling motor: Testing the Transom Mount Installation To test the transom mount installation: Installing the Wiring Harness To install the wiring harness: To connect the NMEA output to a NMEA device: Wiring Diagram Wiring to a Fuse Block USING THE FISHFINDER 160C To start your Fishﬁnder for the ﬁrst time: Simulator Mode The Keypad The Arrow keys The ENTER key The MENU key The Fishﬁnder 160C Display Water Depth Water Temperature Speed Distance The Adjustment Bar To change a setting on the unit: Range Gain Scroll The Setup Menu To display the Setup menu: To change a Setup menu item: Alarms Battery Graph Fish ID Beam Whiteline Auto Gain Background Black Numbers Keel Offset Size Water Temp Auto Calibrate Speed To calibrate the speed: Reset Distance Units Depth Temperature System Simulator NMEA Output Beeper Contrast Light Defaults Speciﬁcations Physical Speciﬁcations Power Usage: Sonar Limited Warranty Software License Agreement Declaration of Conformity (DoC) INDEX