Manuals / Brands / Marine Equipment / Fish Finder / Garmin / Marine Equipment / Fish Finder

Garmin 160C Speciﬁcations, Physical Speciﬁcations, Power, Sonar, APPENDIX, Usage:, Depth:

1 34

Download 34 pages, 1.44 Mb

APPENDIX > SPECIFICATIONS

APPENDIX

Speciﬁcations

Physical Speciﬁcations

Size: 4.9" H x 6.1" W x 2.9" D (12.4 cm x 15.5 cm x 7.4 cm)

Weight: 1.1 lbs. (0.5 kg)

Display: 4.4" diagonal (11.3 cm), 3.14" H x 3.14" W (8.0 cm x 8.0 cm) high-contrast, 16-color CSTN display with adjustable brightness (128 x 128 pixels)

Case: Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 standards

Temp. Range: 5°F to 130°F (-15°C to 55°C)

Power

Source: 10-18v DC

Usage: 9 watts max. at 18V DC; 7 watts at 12V DC nominal.

Fuse: AGC/2A - 2.0 Amp

Sonar

Power: Dual Beam: 150 watts (RMS); 1200 watts (peak to peak)

Frequency: 200 kHz/80kHz

Depth: 900 foot max depth (Depth capacity is dependent on water salinity, bottom type, and other water conditions.)

22	Fishﬁnder 160C Owner’s Manual

Contents

Page Page INTRODUCTION About This Manual Appendix TABLE OF CONTENTS Product Registration Contact Garmin Caring for the Fishﬁnder 160C Caring for the Screen Cleaning the Case Warnings Important Information Understanding Sonar Understanding the Fishﬁnder Screen Using Dual Beam Whiteline Thermoclines INSTALLING THE FISHFINDER 160C Packing List Unit Installation To mount the bracket assembly: To install the unit on the mounting bracket: Transducer Installation To assemble the transducer: Selecting a Transom Mount Location Mounting the Transducer on a Transom To mount the transducer on a transom: Mounting the Transducer on a Trolling Motor To mount the transducer on a trolling motor: Testing the Transom Mount Installation To test the transom mount installation: Installing the Wiring Harness To install the wiring harness: To connect the NMEA output to a NMEA device: Wiring Diagram Wiring to a Fuse Block USING THE FISHFINDER 160C To start your Fishﬁnder for the ﬁrst time: Simulator Mode The Keypad The Arrow keys The ENTER key The MENU key The Fishﬁnder 160C Display Water Depth Water Temperature Speed Distance The Adjustment Bar To change a setting on the unit: Range Gain Scroll The Setup Menu To display the Setup menu: To change a Setup menu item: Alarms Battery Graph Fish ID Beam Whiteline Auto Gain Background Black Numbers Keel Offset Size Water Temp Auto Calibrate Speed To calibrate the speed: Reset Distance Units Depth Temperature System Simulator NMEA Output Beeper Contrast Light Defaults Speciﬁcations Physical Speciﬁcations Power Usage: Sonar Limited Warranty Software License Agreement Declaration of Conformity (DoC) INDEX