Garmin 160C 34

Garmin International, Inc.

1200 East 151st Street, Olathe, Kansas 66062, USA

Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, UK

Garmin Corporation

No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan

www.garmin.com

Part Number 190-00532-00 Rev. C

Contents

Page Page INTRODUCTION About This Manual Appendix TABLE OF CONTENTS Product Registration Contact Garmin Caring for the Fishﬁnder 160C Caring for the Screen Cleaning the Case Warnings Important Information Understanding Sonar Understanding the Fishﬁnder Screen Using Dual Beam Whiteline Thermoclines INSTALLING THE FISHFINDER 160C Packing List Unit Installation To mount the bracket assembly: To install the unit on the mounting bracket: Transducer Installation To assemble the transducer: Selecting a Transom Mount Location Mounting the Transducer on a Transom To mount the transducer on a transom: Mounting the Transducer on a Trolling Motor To mount the transducer on a trolling motor: Testing the Transom Mount Installation To test the transom mount installation: Installing the Wiring Harness To install the wiring harness: To connect the NMEA output to a NMEA device: Wiring Diagram Wiring to a Fuse Block USING THE FISHFINDER 160C To start your Fishﬁnder for the ﬁrst time: Simulator Mode The Keypad The Arrow keys The ENTER key The MENU key The Fishﬁnder 160C Display Water Depth Water Temperature Speed Distance The Adjustment Bar To change a setting on the unit: Range Gain Scroll The Setup Menu To display the Setup menu: To change a Setup menu item: Alarms Battery Graph Fish ID Beam Whiteline Auto Gain Background Black Numbers Keel Offset Size Water Temp Auto Calibrate Speed To calibrate the speed: Reset Distance Units Depth Temperature System Simulator NMEA Output Beeper Contrast Light Defaults Speciﬁcations Physical Speciﬁcations Power Usage: Sonar Limited Warranty Software License Agreement Declaration of Conformity (DoC) INDEX