Garmin 190-00557-00, 20072009 Man OverBoard (MOB), To clear one or all proximity waypoints from the list:, To turn proximity alarms on or off:, To create a waypoint using the MOB feature:

Basic Operation

5.Using the ROCKER to select the Radius field and enter a value.

To clear one or all proximity waypoints from the list:

To remove or review a single entry, press ENTER. To remove all waypoints from the list, press MENU > Remove All.

To turn proximity alarms on or off:

1.Press MENU twice to open the Main Menu.

2.Highlight the Proximity icon and press ENTER to open the Proximity Waypoints page.

3.Highlight the Proximity Alarm Tones button, and press ENTER to open the Alarm Tones page. Place a check in the Proximity Alarms box to activate alarms. As you approach a proximity waypoint, a tone sounds and a “Near Proximity Point” message appears. When you move outside the set radius, a “Leaving Proximity Point” message is shown. Use this page to select tones for each alarm.

Man OverBoard (MOB)

Another method for creating a waypoint is the Man Overboard (MOB) feature. Use this application for marking a location on water where you cannot stop quickly and must return to a point where there are no landmarks for reference.

To create a waypoint using the MOB feature:

1.Press and hold FIND/MOB to mark the MOB waypoint.

2.Press ENTER to open the Map page showing the path from your current location to the MOB point. Use the Compass page for additional guidance to the MOB point.

10 GPSMAP 76Cx Owner’s Manual