Interface Setup Page

Use when connecting to a computer.

To access the Interface Setup page:

From the Setup Menu, select Interface.

Serial Data Format—sets the data format to one of the following:

•GARMIN—the proprietary format used to exchange waypoint, route, track log and MapSource data with a computer.

•NMEA In/NMEA Out—Supports input and output of standard NMEA 0183 version 3.01 data.

•TEXT OUT—Allows ASCII text output of location and velocity information. No input.

•NONE—Provides no interfacing capabilities.

USB Mass Storage—allows the microSD card to be used as a USB Mass Storage device. It also allows transfer of Track Log Data to Garmin MapSource.

Main Menu

To activate ���USB ����Mass �������Storage ���for ���HCx units:

1.Connect the unit to a computer.

2.Select USB Mass Storage, and press Enter.

3.Double click My Computer to observe a new Removable Drive listing.

To view information for the microSD card:

Press Menu prior to opening the USB Mass Storage page and, select Card Info.

To transfer files to the microSD card:

1.Double-click the My Computer icon.

2.Browse the computer for the file.

3.For a computer, select the file, Edit > Copy.

Note: If you have several network drives mapped to your computer, log on without

connecting to the network or click Start > Settings > Control Panel > Administrative Tools > Computer Management > Storage > Disk Management and remap a drive letter

for the storage device.

4. After the transfer, end the USB cable connection.

GPSMAP 76Cx Owner’s Manual

5