ROCKER, the GPSMAP 76Cx enters pan mode, which moves the map to keep the white arrow (map pointer) within the screen area.

When you are in pan mode, you can move the map pointer about the page to highlight and identify map items. Add and configure up to four optional data fields to the top of the page to provide a variety of travel and navigational information.

To show data fields on the Map Page:

1.Press MENU > Data Field.

2.Select the number of data fields you want to show on the Map page, and press ENTER.

To change a data field:

1.Press MENU > Change Data Fields. The first data field is highlighted.

2.Press ENTER.

3.Select an option.

4.Move to the next field and repeat.

Main Pages

Using Additional Map Data

View listings such as nearby restaurants, lodging, shopping centers, attractions, and entertainment, and you can retrieve addresses and phone numbers for any listed location when using optional MapSource data. Using BlueChart g2 data, you can view marine navaids, wrecks, obstructions, and anchorage locations.

To review map information:

1.From the Map page, press MENU > Setup Map.

2.Select the Map Setup-information page. The list of maps stored on the microSD card appears. A check mark means a map is active.

Changing the Zoom Range

Press IN to decrease the Zoom Range and show an area with greater detail; press OUT to increase the Zoom Range and show a larger area with less detail.

The current Zoom Range setting is shown in the lower left corner of the Map page. If no further map information is available, “overzoom” appears under the Zoom Range When using MapSource detailed

GPSMAP 76Cx Owner’s Manual

7