Using the Fishfinder 340C > Using the Main Menu
Using the Numbers Page
When you use the Numbers Page, you can view three data fields of your choice. (See “Configuring Advanced Data Fields” on page 37 for more information about the data fields.)
To change the data fields on the Numbers Page:
1.From the Numbers Page, press and hold DATA/CNFG. The Data Configuration Menu appears.
2.Use the ROCKER to select the field that you want to change, and press ENTER. A menu of your option categories appears.
3.Use the ROCKER to select the category and data field that you want to appear on the screen in that position, and press
ENTER.
4.Make all changes. When you are finished, press QUIT.
Using the Main Menu
The Main Menu contains the Fishfinder settings that should not require frequent change. The Main Menu is divided into the following tabs: Graph, Sonar, Temp, Alarms, System, Units, and Time. Each tab is described in more detail in this section.
To view or change a setting in the Main Menu:
1.Press and hold ADJ/MENU. The Main Menu appears.
2.Highlight the tab for the option you want to view or change.
3.Highlight the setting you want to change, and press ENTER. The available settings appear.
4.Highlight the setting you want, and then press ENTER. The new setting is now active.
Your changes to the Main Menu settings are used until you go to the Main Menu and set the System Factory Settings option to Yes.
26 | Fishfinder 340C Owner’s Manual |