Using the Fishfinder 340C > Using the Main Menu

System Tab

The System tab enables you to control various system and interface settings.

The following settings are available:

•Beeper—controls all sounds. Select from Off, Alarms Only (sounds for alarms/messages), or Key and Alarm (sounds for key presses and alarms/messages).

•Language—select from various languages for the

Fishfinder’s on-screen display.

•System Mode—lets you simulate Fishfinder operation. If the Fishfinder does not detect a transducer, it automatically enters Simulator mode.

•NMEA Input/Output—controls the input and output of

NMEA 0183 version 3.01 data to and from the Fishfinder.

This setting must be On to receive GPS navigational data and send Sonar NMEA data. See page 16 for details on available NMEA sentences.

•Factory Settings—restores all settings to the original factory default values. The Fishfinder 340C turns off and back on again when you select Yes.

•Software Version—shows the Fishfinder’s software version, copyright date, and unit ID.

•Reset Odometer—this option appears only if you are using a speed-capable transducer/sensor. This resets the odometer field to zero.

32

Fishfinder 340C Owner’s Manual