Marine Video Cable

The included Marine Video 17-pin cable allows input of NTSC (National Television System Committee)/PAL (Phase Alternate Line) composite video sources, and PC monitor output (4008/4208/5008/5208 = VGA output, 4012/4212/5012/5212 = XGA output). Marine Video inputs are only available on the chartplotter to which they are attached and will not transmit over the Garmin Marine Network.

1 & 2. VIDEO 1 and VIDEO 2 Inputs (RCA connectors) allow input from two separate NTSC/PAL compatible video devices, such as VCR, DVD, TV, or a video camera. The chartplotter can display one video input at a time or alternate between the two. See the Owner’s Manual for details. Sound from a video source must be attached to a separate stereo/audio system. The video output from video device attaches to the Video 1 (Black Cable) or Video 2 (Gray Cable) RCA connectors.

3.Use the PC monitor output (HD 15-pin) connector for remote viewing of the MFD display on a computer monitor. The remote monitor must be capable of at least VGA resolution and have multi-sync capability.

 

 

Note

Connector

Pin

Function

 

 

1

RCA-1

2

Video 1 in (black jacket)

 

 

 

Center

 

 

3

 

 

RCA-1 Outer

6

Video 1 in, gnd

 

 

2

RCA-2

11

Video 2 in (gray jacket)

 

 

 

Center

 

 

 

 

 

RCA-2 Outer

15

Video 2 in, gnd

Pin 2

Pin 1

3

HD-15 Pin 1

1

VGA, analog-red

2

 

 

HD-15 Pin 2

4

VGA, analog-green

 

Pin 7

 

HD-15 Pin 3

3

VGA, analog-blue

 

 

HD-15 Pin 5

13

VGA, analog, gnd

 

 

 

Pin 17

 

 

HD-15 Pin 6

8

VGA, analog-red, gnd

 

 

HD-15 Pin 7

8

VGA, analog-green, gnd

1

 

 

 

 

HD-15 Pin 8

8

VGA, analog-blue, gnd

Marine Video Cable

 

 

HD-15 Pin 10

13

VGA, sync-Gnd

 

End View

 

 

 

 

HD-15 Pin 13

7

VGA, H-sync

 

 

 

HD-15 Pin 14

12

VGA, V-sync

 

 

 

HD-15 Pin

9

VGA, overall shield

 

 

 

shell

 

 

14

GPSMAP 4000/5000 Series Installation Instructions