Garmin FR60 Using the GSC™, Using the Weight Scale, Manual Calibration, Turning Off the Foot Pod, down, down, ENTER, ENTER, LIGHT, 1.Press MODE > SETTINGS

Getting Started

5.Use UP and down to adjust the calibration distance to the actual distance.

6.Press ENTER to save the calibrated distance.

Manual Calibration

If your foot pod distance seems slightly high or low each time you run, you can manually adjust the calibration factor.

1.Press MODE > SETTINGS >

SPORT > RUN > FOOT POD > CALIBRATE > MANUAL.

2.Use UP and down to adjust the calibration factor.

3.Press ENTER to save the calibration factor.

Turning Off the Foot Pod

After 30 minutes of inactivity, the foot pod automatically turns off to conserve the battery.

Using the GSC™ 10

Your watch is compatible with the GSC 10 speed and cadence sensor for bikes. The GSC 10 is an optional accessory that is available at http://buy.garmin.com.

Using the Weight Scale

If you have an ANT+ compatible weight scale, the FR60 can read the data from the weight scale.

1. Press and hold LIGHT/	until
the FR60 starts scanning.

2.Stand on the scale when indicated.

Note: If using a body composition scale, remove shoes and socks to ensure that all body composition parameters are read and recorded.

3. Step off the scale when indicated.

Note: If an error occurs, step off the scale. Step on when indicated.

10 FR60 Owner’s Manual