Pairing Sensors
The ANT+™ sensors included with your watch are already paired. Press MODE until training mode appears.
The and icons appear on the FR60 screen when the sensors are paired.
If you purchased a sensor (with ANT+ wireless technology) separately, you need to pair it with your FR60.
After you pair the first time, your FR60 automatically recognizes your sensor each time it is activated. This process occurs automatically when you turn on the FR60 and only takes a few seconds when the sensors are activated and functioning correctly. When paired, your FR60 only receives data from your sensor, and you can go near other sensors.
Getting Started
Paring Additional Accessories
1.Move away (10 m) from other sensors while the FR60 is trying to pair with your sensor for the first time. Bring your sensor within range (3 m) of the FR60.
2.Press MODE > SETTINGS >
SPORT.
3.Select RUN, GENERAL, or
BIKE > HEART RATE, FOOT POD, or BIKE SENSOR > ON.
3. While the FR60 scans for new sensors, the , , and icons blink. The icons are solid when paired.
tip: The accessory needs to send data to complete the pairing process. You need to wear the heart rate monitor, take a step wearing the foot pod, or pedal your bike with the GSC 10.
After a period of inactivity, accessories enter sleep mode to conserve battery life. If the accessory icons are not displayed before
FR60 Owner’s Manual |