Getting Started

resuming your activity, you must reestablish the connection with the FR60.

To reestablish the connection Make sure accessory is active. Stop and restart the training session

OR

Press MODE and cycle out of training mode and then back into training mode.

For instructions on using the heart rate monitor, see page 7. For instructions on using the foot pod, see page 8.

For information about purchasing additional accessories, go to http://buy.garmin.com.

Going for a Run

1.Press MODE to view the training page.

2.Press START to start the timer.

3.After completing your run, press STOP.

4.Press and hold LAP to save your activity and reset the timer.

Downloading Free

Software

1.Go to www.garmin.com/FR60 /owners.

2.Follow the on-screen instructions.

Sending Workout Data to Your Computer

Note: You must download software as instructed so that the necessary USB drivers are installed before connecting the USB ANT Stick to your computer.

FR60 Owner’s Manual