Installing the Foot Pod Under the Insole

Note: Your compatible shoe will have a pocket under the insole. You may need to remove a foam insert before installing the foot pod.

1.Press the tab on the lace clip. Lift and separate the foot pod from the lace clip.

2.Lift the insole of the shoe.

3.Place the foot pod in the pocket with the ANT+™ logo facing up and the notch pointing toward the toe of your shoe.

Training with the Foot Pod

1.Bring the FR60 within range (3 m) of the foot pod.

2.Press MODE to access training

mode. The foot pod icon appears on the training page.

 

Getting Started

3. If

or foot pod data does not

appear, you may have to pair the foot pod and the FR60.

See page 5.

Calibrating the Foot Pod Calibrating your foot pod is optional and can improve accuracy. You can automatically or manually adjust the calibration.

Auto Calibration with a Known Distance

The minimum calibration distance is 400 m. For best results, calibrate the foot pod using the longest distance possible at your typical pace. A regulation track (one lap = 400 m) is more accurate than a treadmill.

1.Press MODE > SETTINGS >

SPORT > RUN > FOOT POD > CALIBRATE > AUTO.

2.Press START to begin recording.

3.Run or walk the known distance.

4.Press STOP.

FR60 Owner’s Manual