GMA 350 Audio Panel
CLEARANCE RECORDER AND PLAYER
The GMA 350 contains a digital clearance recorder that records up to
2.5minutes of the selected COM radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest block.
Pressing the PLAY Key once plays the latest recorded memory block. The Play function can also be accessed via Voice Recognition commands. Refer to the ‘Voice Recognition’ section for more information.
Pressing the MKR/MUTE Key during play of a memory block stops play. If a COM signal is detected during play of a recorded memory block, play is halted.
Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block. Each subsequent press of the PLAY Key selects the previously recorded memory block.
Powering off the unit automatically clears all recorded blocks.
Stops Play
Marker Mute Key
VOICE RECOGNITION
Voice Recognition allows the pilot (and optionally copilot) to control the GMA 350 using spoken commands. To activate Voice Recognition, push and hold the
If a command is correctly interpreted by the GMA 350, a positive acknowledgement chime will be played, and the pilot should verify that the correct button selection is indicated by the triangular annunciator lights. Alternatively, some commands will be indicated by a voice response from the GMA 350. If the desired modes are not indicated by annunciator lights or a voice response, the pilot should repeat the command by using the
24 | Garmin GMA 350 Pilot’s Guide |
