GMA 350 Audio Panel
MONO/STEREO HEADSETS
Stereo headsets are recommended when using the GMA 350. Using a monaural headset in a stereo jack shorts the right headset channel output to ground. While this does not damage the Audio Panel, a person listening on a monaural headset hears only the left channel in both ears. If a monaural headset is used at one of the passenger positions, any other passenger using a stereo headset hears audio in the left ear only.
TRANSCEIVERS
NOTE: Transceiver functions may also be accessed via Voice Recognition commands. Refer to the Voice Recognition section for more information.
Audio from the #1 or #2 COM receiver can be selected independently by pressing the respective Key(s) (COM1 or COM2).
Pressing MIC1 or MIC2 selects the #1 or #2 transmitter and simultaneously selects the related COM receiver (COM1 or COM2) allowing received audio to be heard. The other COM receiver can be added by pressing the respective key. During reception of audio from the COM radio selected for transmission, audio from the other COM radio is muted.
ENABLING/DISABLING MONITORED COM MUTING
Press and hold COM1 or COM2 to enable/disable monitored COM muting during reception of audio from the COM radio selected for transmission. The aural message “Monitor Mute Enabled/Disabled” is heard.
8 | Garmin GMA 350 Pilot’s Guide |
