Garmin Map Pilot for Mercedes-Benz Starting a Route, Following a Route, Stopping the Route, Go, NOTE, Layers, Traffic, 3D Terrain, Rotate Mode, View Toggle, Set Location, 3D Buildings

4Rotate the browse map tools wheel to select an option:

•Select Set Location to set your current location. You can maneuver the controller over the map to find specific locations.

NOTE: You must have your MAP PILOT set to simulation mode and you must not be navigating a route to set locations.

•Select Layers to select which map layers to display on the map. You can select any combination of Traffic, 3D Buildings, 3D Terrain, and Points of Interest.

•Select Rotate Mode to enable a rotated view of the map.

•Select View Toggle to view the map in 3-D or 2-D North Up.

•Select Points of Interest to browse for businesses and attractions near the current map section.

•Select Locations Details to display details of your current or selected location.

Starting a Route

1Search for a location (page 9).

2 Select a location.

3 Select Go!.

Stopping the Route

From the main menu, select .

Following a Route

The route is marked with a magenta line. A checkered flag marks your destination.

As you travel, the navigation system guides you to the destination with voice prompts, arrows on the map, directions at the top of the map, and guidance information in the instrument cluster display. If you depart from the original route, the system recalculates the route and provides new directions.

16 MAP PILOT owner’s manual