Introduction
The SL40 is intended for use with standard aviation accessories. The following items are required for the installation:
x comm antenna with cables x a microphone
x a speaker or headphone
These items may be installed dedicated to the SL40 comm or by connections to an audio panel.
SPECIAL TOOLS REQUIREDCrimp Tool
A crimp tool meeting MIL specification
For pin p/n |
|
|
Astro Tool Corp. | Phone (503) | |
21615 SW TV Highway | Fax | (503) |
Beaverton, OR 97006 |
|
|
Crimp tool: | Astro Tool part #615708 | |
Positioner: | Astro Tool part #616356 | |
For pin p/n |
|
|
ITT Cannon | Phone (714) | |
1851 E. Deere Ave. | Fax | (714) |
Santa Ana, CA |
|
|
Insertion tool: | ITT part # | |
Regular duty Crimp tool: | ITT part | |
Regular duty Locator tool: | ITT part | |
Heavy duty Crimp tool: | ITT part | |
Heavy duty Locator tool: | ITT part |
An aircraft radio station license is required for operation of the transmitter once installed in the aircraft. An application must be submitted on FCC Form 404, which may be obtained from the FCC in Washington, DC, or any of its field offices. Procedures for applications are in CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.
4 | Apollo SL40 Installation Manual |