![](/images/backgrounds/130973/130973-3815x1.png)
Installation
Step 1.
Step 2.
Step 3.
Clamp Nut
| Slit 1/4" (2X) |
0.031 | 0.125 |
| |
| 0.375 |
Braid Clamp
Cap
Solder Center
Conductor
-Slide clamp nut over coax.
-Strip coax as illustrated.
-Cut two 1/4" slits in jacket 180 degrees apart.
-Slide braid clamp over end of coax and under the braid.
-Insert coax with braid clamp into
connector and tighten clamp nut securely. - Solder the center conductor of the coax
to the contact as illustrated.
- Attach the cap and secure tightly.
Assembly instructions for right angle connector part
Figure 4 Coax Connector Assembly
Apollo SL40 Installation Manual | 9 |