Basic Operation
Frequency The Frequency Monitoring function allows you to listen Monitoring to the Standby frequency, while monitoring the Active
frequency for activity.
MON
119.10 > m121.50
Press the MON button to listen to the standby frequency. A small “m” is displayed in front of the Standby frequency. When the Active frequency receives a signal, the unit will switch automatically to the Active frequency and then switch back when activity ceases. An arrow (< or >) will point to the frequency that you are currently listening to. A slight clicking sound occurs when the radio is checking the Active frequency for activity. The Monitor function is deactivated when you press MON.
Recalling a Frequency
The SL40 can access several areas of stored frequencies. The SL40 can also receive airport frequencies if connected to certain Apollo GPS receivers.
RCL
Remote | Auto Stack | User | Weather | |
List | Memory | |||
(REM) | (WTH) | |||
(LST) | (MEM) | |||
|
|
Only available if connected
to Apollo GPS receiver and a list has been received
Remote (REM)
The Remote function will allow the SL40 to access the airport frequency database in an Apollo GPS receiver.
RCL
119.10REM SLE
119.10ATS124.55
Press RCL to view the Remote (REM) frequencies. Then, turn the Small, inner knob to display the available frequencies. The waypoint type and frequency are displayed.
If not connected to an Apollo GPS, or the list is not received, the list will not be available.
4