Basic Operation
Removing a Frequency from User Memory
You may edit the contents of User memory to remove its stored frequencies when you want to make a change or you receive a “MEM Full” message.
1.Press RCL. Turn the Large knob to the User (MEM) frequencies.
2.Press MEM. Turn Large knob to show “Remove.”
3.Turn the Small knob to choose the frequency to Remove.
4.Press MEM to remove the frequency. Or, turn the Large knob to “Abort” and press MEM to cancel and leave memory as it was.
Replacing a Frequency from User Memory
You may edit the contents of User memory to replace its stored frequencies when you want to make a change or you receive a “MEM Full” message.
1.Select the desired new frequency with the Large and Small knobs.
2.Press RCL. Turn the Large knob to the User (MEM) frequencies.
3.Press MEM. Turn Large knob to show “Replace.”
4.Turn the Small knob to choose the frequency to Replace.
5.Press MEM to replace the displayed stored frequency with the current Standby frequency. Or, turn the Large knob to “Abort” and press MEM to cancel and leave memory as it was.
7