System Functions
Mic Squelch
1 and 2
The input level required to break squelch by the microphone is set from this page. Lower numbers indicate a higher input level necessary to break squelch. Turn the Small knob to change the value. The range is from 0 to 127.
Transmit Mic
Intercom
Level
Mic1 Sqlch
The Transmit Microphone page allows you to control which microphone is permitted to transmit. You may choose Mic 1, 2, or both. To adjust the Transmit Mic control:
1.Press and hold the MON button for about two seconds. This will access the System Functions mode.
2.Rotate the Large knob to display the Transmit Mic page.
3.Rotate the Small knob to select MIC1, MIC2, or MIC1+MIC2.
4.Press any key to exit the Setup Functions mode.
5.Select an appropriate frequency, key the transmitter, and talk into the microphones to check for the intended operation.
This function adjusts the Intercom Audio Level. Turn the Small knob to change the value. The range is from 0 to 255. Setting the value to 0 slaves the sidetone level to the volume control knob.
Intcom Lvl
12