Basic Operation
Assigning an ID to a User Frequency
Frequencies in User (MEM) memory can be given an alphanumeric identifier for your ease of use.
1.Press RCL. Turn the Large knob to the User (MEM) frequencies.
2.Press MEM and hold it for about two seconds. “Assign ID” and the frequency to be given an ID will be displayed.
3.Turn the Small knob to select the desired User frequency.
4.Press MEM. Six underscored spaces will appear and the first one will flash.
5.Turn the Small knob to select characters. Turn the Large knob to move to another space. Continue to select the desired characters.
6.Press MEM to save the displayed ID. Turn the Large knob to “Done” and press MEM.
The alphanumeric ID for a frequency is displayed only when looking at user stored frequencies using the recall (RCL) feature. The stored frequency is displayed numerically once selected as the active or standby frequency.
You can remove the ID for a frequency while retaining the frequency in User memory by setting all characters to underscores and pressing MEM.
8