Initio INI-9100UW user manual ∙ Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive A, Enter

3.Select Maintenance/Selective Install from the window by highlighting it using the UP or DOWN ARROW keys, press

<ENTER>

∙Select Disk Driver Options (Configure/Load/Unload Disk Drivers) from the window by highlighting it using the UP or DOWN ARROW keys, press <ENTER>

4.Follow the directions on screen until you come to a window titled Select A Disk Driver.

∙Press the <Ins> key to insert a new driver.

∙Press the <F3> key to specify a different source drive/directory.

5.In the new window that is displayed enter the Initio Driver path name:

∙Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive A:

∙ Type: A:\netware\v4x Press <ENTER>

6.In the window Select A New Disk Driver To Install: a list of available Initio drivers for NetWare and the version number will be displayed.

∙Select ini910U.DSK, press <ENTER>

∙Press <ENTER> to confirm, then press <ENTER> to continue

7.Once you have selected the driver, the Loaded Drivers window below the list of Available Drivers will be updated with the driver name you selected.

∙To complete the driver loading press <ENTER>

8.This completes loading the Host Adapter Driver, follow the directions on screen to complete the NetWare installation.

Device driver command line options

The Initio device drivers support command line switches to optimize driver performance. Device drivers normally, once installed, require no further

8-8