Initio INI-9100UW user manual Updating the Initio device driver

4.This completes loading the Host Adapter Driver, follow the on-screen directions to complete the Windows 95 installation. Exit and reboot the system to activate the device driver

5.It is highly recommended that you verify your Windows 95 device driver has been properly installed by selecting MY COMPUTER from the desktop. Then select CONTROL PANEL:

∙Select SYSTEM from within the CONTROL PANEL group,

∙Select DEVICE MANAGER from within the SYSTEM group,

∙Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and

∙Select INITIO INI-9100U/9100UW SCSI HOST ADAPTER from within the SCSI CONTROLLER listing. If “This device is working properly” is displayed on your screen, the driver has been correctly installed.

Updating the Initio device driver

1.Once a Windows 95 session is established, use your installed mouse or the appropriate key strokes to select MY COMPUTER from the Main Desktop. Execute the following steps:

∙Select CONTROL PANEL from within the MY COMPUTER group.

∙Select SYSTEM from within the CONTROL PANEL group.

2.Select the DEVICE MANAGER tab from within the SYSTEM group.

∙Select the SCSI CONTROLLERS category from within the DEVICE MANAGER listing.

∙Select the INI-9100U/9100UW SCSI HOST ADAPTER sub-category from within the SCSI CONTROLLERS listing

6-7