Initio INI-9100UW user manual Removing the Initio driver from a UnixWare system, 11-8

Removing the Initio driver from a UnixWare system

1.Once a UnixWare session is established and a command prompt is ready, type (recall that UnixWare is case sensitive):

∙ Type: /etc/conf/bin/idinstall -d i910u <ENTER> to delete the following files:

/etc/conf/mdevice.d/i910u

/etc/conf/sdevice.d/i910u

/etc/conf/pack.d/i910u/driver.o

/etc/conf/pack.d/i910u/space.c

/etc/conf/pack.d/i910u/disk.cfg

2.Then rebuild the UnixWare kernel by executing the following commands at the system prompt:

∙/etc/conf/bin/idbiuld -B -K <ENTER>

∙/cp /etc/conf/cf.d/unix /stand/unix <ENTER>

∙cd/ <ENTER>

∙shutdown -g0 (where 0 is Zero) <ENTER>

∙Y <ENTER>

11-8